Skip to main content

52950WA Advanced Diploma of Civil and Structural Engineering

National ID
52950WA
WA Course Code
BGQ97
CRICOS code
121317F
Add to favourites
Person sitting at desk with designing papers
Person working with tools

Why choose this course?

Take the next step towards a professional engineering career with advanced skills in civil and structural engineering. This qualification prepares you to work on a diverse range of infrastructure and construction projects, from high-rise buildings and bridges to roads, drainage systems, dams and pipeline networks.

Throughout the course, you will develop practical skills in structural and civil design, reinforced concrete and steel detailing, surveying, geotechnical engineering, computer-aided design (CAD), 3D modelling and Building Information Modelling (BIM). You will learn to apply advanced engineering principles, use industry-standard software and technologies, and contribute to engineering design, project coordination and technical problem-solving.

Practical, project-based learning will help you build real-world experience while developing skills in technical documentation, communication, teamwork and professional engineering practice. Using industry-standard software and equipment, you will gain experience that reflects current engineering and construction industry requirements.

Career opportunities include Engineering Associate, Civil or Structural Design Technician, CAD/BIM Technician, Structural Detailer, Site Coordinator, Project Support Officer and Technical Officer within engineering consultancies, construction companies, infrastructure providers, government agencies and resource-sector organisations.

This course will be delivered at East Perth and Perth campus. Specialised classrooms are available across both campus locations and classes will be scheduled to provide you access to these facilities. Your class locations will be provided at the commencement of each semester and detailed on your timetable. Transport between both campuses is free and you can catch either the bus or train.

On successful completion, you may choose to continue your studies at university and further advance your engineering qualifications and career opportunities.

Career opportunities

  • Civil Engineering Assistant
  • Engineering Associate - Civil Engineer

When choosing a course, it's important to think about the key skills and knowledge you'll need, as well as how you'll be assessed. Take a look at this information and consider if you might face any challenges in meeting the course expectations and requirements.

  • An interest in solving practical and technical problems
  • Planning and organisational skills
  • Analytical skills and the ability to interpret information
  • Strong communication skills
  • An understanding of the principles of physics and maths

  • An IELTS score (academic) of 6.0 with no band score less than 5.0 or equivalent.

  • Completion of 52951WA Diploma of Civil and Structural Engineering is required for entry into this course.

​Please view Admission requirements for your country of origin.

Your study options

Semester 1, 2027

At this campus
This course may be delivered at North Metropolitan TAFE's East Perth and Perth Campus. Specialised classrooms are available across both campus locations and classes will be scheduled to provide student access to these facilities. Your class locations will be provided at the commencement of each semester and detailed on your timetable. Transport between both campuses is free and you can catch either the bus or train.
Duration | 2 semesters
When | Semester 1, 2027
Where | North Metropolitan TAFE (52786)

Location map

How | On campus, to a minimum of 20 contact hours per week
Fees (total indicative for course)
  • Tuition fee: $16,216
  • Resources fee: $1,100
  • Materials fee: $160

Tuition fees are reviewed annually. If tuition fees are increased, you will be required to pay the new fees as they are introduced. You will be provided with an indicative schedule of fees in your Letter of Offer.

Resource fees are for consumables you use in your course e.g. paint, internet etc. You pay this fee to your college at enrolment. If your course goes longer than one semester, the resource fee may not need to be paid in one amount but may be spaced out over the duration of your course. Your college will advise you of the payment amount each semester.

Material fees are for items that remain your property after the course has been completed e.g. personal protective equipment, tools, text books etc.

Work placement

There is no work placement requirement for this course.

Year 11
MEM30522 Certificate III in Engineering - Technical - BIV7
1 semester
Year 12
52951WA Diploma of Civil and Structural Engineering - BGR66
2 semesters
52950WA Advanced Diploma of Civil and Structural Engineering - BGQ97
2 semesters

To achieve this qualification, students must demonstrate competency in 34 units. These 34 are comprised of 24 core units and 10 elective units. Elective units listed below have been selected in consultation with industry.

Students who enrol into this qualification will be eligible for credit transfer of the units that they have already achieved. Fees paid by international students are set on a commercial basis and are paid as a whole of course fee - no refund will apply to credit transfers. Please refer to your letter of Offer for detailed duration and costings for your enrolment.

Core units
    National ID
    Unit title
  • DCSASS642 Produce an advanced engineering design for a steel structure
  • DCSBCD617 Produce basic concrete drawings
  • DCSBCE602 Use basic CAD in engineering
  • DCSBFE613 Use basic fluids in engineering
  • DCSBSA640 Use basic structural analysis in engineering
  • DCSBSE612 Use basic soils in engineering
  • DCSCAD616 Use CAD in engineering
  • DCSCAE627 Use 3D CAD in engineering
  • DCSCON632 Use construction in engineering
  • DCSGRE603 Use graphics in engineering
  • DCSMAT608 Use materials in engineering
  • DCSOEE635 Operate in an engineering environment
  • DCSPEP619 Apply professional engineering practice
  • DCSPHY633 Use physics in engineering
  • DCSSOL623 Use soils in engineering
  • DCSSOM638 Use strength of materials in engineering
  • DCSSTA634 Use statics in engineering
  • VU23936 Produce drawings to enable road construction
  • VU23952 Produce an engineering design for drainage pipes and culverts
  • VU23953 Produce an advanced engineering design for a reinforced concrete structure
  • VU23957 Produce an engineering design for a reinforced concrete structure
  • VU23959 Produce an engineering design for a steel structure
  • VU23964 Produce advanced engineering drawings for a reinforced concrete structure
  • VU23965 Produce advanced engineering drawings for a steel structure
Elective units
    National ID
    Unit title
  • CPPBDN6106 Produce building information modelling for building design projects
  • DCSBIM639 Use building information modelling (BIM) technology for a project
  • DCSBSD611 Produce basic steel drawings
  • DCSENV636 Use basic environmental concepts in engineering
  • DCSFLE624 Use fluids in engineering
  • DCSSUR614 Use surveying in engineering
  • MEM23004 Apply technical mathematics
  • MEM30012 Apply mathematical techniques in a manufacturing engineering or related environment
  • VU23954 Produce an engineering design for a sewerage reticulation scheme
  • VU23963 Produce an engineering design for a stormwater reticulation scheme

Assessment methods

The methods of assessment used in this course include evidence gathering methods which have been selected in consultation with industry. This includes knowledge questions, case study scenarios, projects, presentations, observations, reports and portfolios. Methods of assessment are based on the job role and evidence is collected via a simulated work environment or workplace created on-campus. Skills are assessed holistically during the practical demonstration of tasks and this evidence is gathered using observation checklists which are completed by the trainer/assessor. 

These assessment strategies and evidence gathering are in accordance with the relevant training package or accreditation guidelines. Detailed Information is available in the assessment matrix, learning plans and assessment tools for each of the units of competency. Assessors use this matrix to ensure assessments, are undertaken across the duration of the course, rather than clustered together at particular times.

Learning resources, facilities and equipment

The following learning resources, facilities and equipment are available at each campus so that you can achieve the skill and knowledge requirements of this course.

Learning resources may include access to Blackboard, PowerPoint presentations, learning guides, handouts, NMT Library catalogue and opportunities to engage with industry professionals. Facilities and equipment may include access to relevant software (CAD, MS Office Suite), computers, printers, workplace manuals/procedures, workshops, and a simulated work environment and facilities including surveying equipment, soil testing labs, fluid labs, strength of material labs, drafting office simulations, and a workshop with hand tools, power tools and access to technicians.

Key dates

Semester and holiday dates are included in your Letter of Offer. View upcoming semester start and end dates.

Semester 2, 2027

At this campus
This course may be delivered at North Metropolitan TAFE's East Perth and Perth Campus. Specialised classrooms are available across both campus locations and classes will be scheduled to provide student access to these facilities. Your class locations will be provided at the commencement of each semester and detailed on your timetable. Transport between both campuses is free and you can catch either the bus or train.
Duration | 2 semesters
When | Semester 2, 2027
Where | North Metropolitan TAFE (52786)

Location map

How | On campus, to a minimum of 20 contact hours per week
Fees (total indicative for course)
  • Tuition fee: $16,216
  • Resources fee: $1,100
  • Materials fee: $160

Tuition fees are reviewed annually. If tuition fees are increased, you will be required to pay the new fees as they are introduced. You will be provided with an indicative schedule of fees in your Letter of Offer.

Resource fees are for consumables you use in your course e.g. paint, internet etc. You pay this fee to your college at enrolment. If your course goes longer than one semester, the resource fee may not need to be paid in one amount but may be spaced out over the duration of your course. Your college will advise you of the payment amount each semester.

Material fees are for items that remain your property after the course has been completed e.g. personal protective equipment, tools, text books etc.

Work placement

There is no work placement requirement for this course.

Year 11
MEM30522 Certificate III in Engineering - Technical - BIV7
1 semester
Year 12
52951WA Diploma of Civil and Structural Engineering - BGR66
2 semesters
52950WA Advanced Diploma of Civil and Structural Engineering - BGQ97
2 semesters

To achieve this qualification, students must demonstrate competency in 34 units. These 34 are comprised of 24 core units and 10 elective units. Elective units listed below have been selected in consultation with industry.

Students who enrol into this qualification will be eligible for credit transfer of the units that they have already achieved. Fees paid by international students are set on a commercial basis and are paid as a whole of course fee - no refund will apply to credit transfers. Please refer to your letter of Offer for detailed duration and costings for your enrolment.

Core units
    National ID
    Unit title
  • DCSASS642 Produce an advanced engineering design for a steel structure
  • DCSBCD617 Produce basic concrete drawings
  • DCSBCE602 Use basic CAD in engineering
  • DCSBFE613 Use basic fluids in engineering
  • DCSBSA640 Use basic structural analysis in engineering
  • DCSBSE612 Use basic soils in engineering
  • DCSCAD616 Use CAD in engineering
  • DCSCAE627 Use 3D CAD in engineering
  • DCSCON632 Use construction in engineering
  • DCSGRE603 Use graphics in engineering
  • DCSMAT608 Use materials in engineering
  • DCSOEE635 Operate in an engineering environment
  • DCSPEP619 Apply professional engineering practice
  • DCSPHY633 Use physics in engineering
  • DCSSOL623 Use soils in engineering
  • DCSSOM638 Use strength of materials in engineering
  • DCSSTA634 Use statics in engineering
  • VU23936 Produce drawings to enable road construction
  • VU23952 Produce an engineering design for drainage pipes and culverts
  • VU23953 Produce an advanced engineering design for a reinforced concrete structure
  • VU23957 Produce an engineering design for a reinforced concrete structure
  • VU23959 Produce an engineering design for a steel structure
  • VU23964 Produce advanced engineering drawings for a reinforced concrete structure
  • VU23965 Produce advanced engineering drawings for a steel structure
Elective units
    National ID
    Unit title
  • CPPBDN6106 Produce building information modelling for building design projects
  • DCSBIM639 Use building information modelling (BIM) technology for a project
  • DCSBSD611 Produce basic steel drawings
  • DCSENV636 Use basic environmental concepts in engineering
  • DCSFLE624 Use fluids in engineering
  • DCSSUR614 Use surveying in engineering
  • MEM23004 Apply technical mathematics
  • MEM30012 Apply mathematical techniques in a manufacturing engineering or related environment
  • VU23954 Produce an engineering design for a sewerage reticulation scheme
  • VU23963 Produce an engineering design for a stormwater reticulation scheme

Assessment methods

The methods of assessment used in this course include evidence gathering methods which have been selected in consultation with industry. This includes knowledge questions, case study scenarios, projects, presentations, observations, reports and portfolios. Methods of assessment are based on the job role and evidence is collected via a simulated work environment or workplace created on-campus. Skills are assessed holistically during the practical demonstration of tasks and this evidence is gathered using observation checklists which are completed by the trainer/assessor. 

These assessment strategies and evidence gathering are in accordance with the relevant training package or accreditation guidelines. Detailed Information is available in the assessment matrix, learning plans and assessment tools for each of the units of competency. Assessors use this matrix to ensure assessments, are undertaken across the duration of the course, rather than clustered together at particular times.

Learning resources, facilities and equipment

The following learning resources, facilities and equipment are available at each campus so that you can achieve the skill and knowledge requirements of this course.

Learning resources may include access to Blackboard, PowerPoint presentations, learning guides, handouts, NMT Library catalogue and opportunities to engage with industry professionals. Facilities and equipment may include access to relevant software (CAD, MS Office Suite), computers, printers, workplace manuals/procedures, workshops, and a simulated work environment and facilities including surveying equipment, soil testing labs, fluid labs, strength of material labs, drafting office simulations, and a workshop with hand tools, power tools and access to technicians.

Key dates

Semester and holiday dates are included in your Letter of Offer. View upcoming semester start and end dates.

Semester 1, 2028

At this campus
This course may be delivered at North Metropolitan TAFE's East Perth and Perth Campus. Specialised classrooms are available across both campus locations and classes will be scheduled to provide student access to these facilities. Your class locations will be provided at the commencement of each semester and detailed on your timetable. Transport between both campuses is free and you can catch either the bus or train.
Duration | 2 semesters
When | Semester 1, 2028
Where | North Metropolitan TAFE (52786)

Location map

How | On campus, to a minimum of 20 contact hours per week
Fees (total indicative for course)
  • Tuition fee: $16,216
  • Resources fee: $1,100
  • Materials fee: $160

Tuition fees are reviewed annually. If tuition fees are increased, you will be required to pay the new fees as they are introduced. You will be provided with an indicative schedule of fees in your Letter of Offer.

Resource fees are for consumables you use in your course e.g. paint, internet etc. You pay this fee to your college at enrolment. If your course goes longer than one semester, the resource fee may not need to be paid in one amount but may be spaced out over the duration of your course. Your college will advise you of the payment amount each semester.

Material fees are for items that remain your property after the course has been completed e.g. personal protective equipment, tools, text books etc.

Work placement

There is no work placement requirement for this course.

Year 11
MEM30522 Certificate III in Engineering - Technical - BIV7
1 semester
Year 12
52951WA Diploma of Civil and Structural Engineering - BGR66
2 semesters
52950WA Advanced Diploma of Civil and Structural Engineering - BGQ97
2 semesters

To achieve this qualification, students must demonstrate competency in 34 units. These 34 are comprised of 24 core units and 10 elective units. Elective units listed below have been selected in consultation with industry.

Students who enrol into this qualification will be eligible for credit transfer of the units that they have already achieved. Fees paid by international students are set on a commercial basis and are paid as a whole of course fee - no refund will apply to credit transfers. Please refer to your letter of Offer for detailed duration and costings for your enrolment.

Core units
    National ID
    Unit title
  • DCSASS642 Produce an advanced engineering design for a steel structure
  • DCSBCD617 Produce basic concrete drawings
  • DCSBCE602 Use basic CAD in engineering
  • DCSBFE613 Use basic fluids in engineering
  • DCSBSA640 Use basic structural analysis in engineering
  • DCSBSE612 Use basic soils in engineering
  • DCSCAD616 Use CAD in engineering
  • DCSCAE627 Use 3D CAD in engineering
  • DCSCON632 Use construction in engineering
  • DCSGRE603 Use graphics in engineering
  • DCSMAT608 Use materials in engineering
  • DCSOEE635 Operate in an engineering environment
  • DCSPEP619 Apply professional engineering practice
  • DCSPHY633 Use physics in engineering
  • DCSSOL623 Use soils in engineering
  • DCSSOM638 Use strength of materials in engineering
  • DCSSTA634 Use statics in engineering
  • VU23936 Produce drawings to enable road construction
  • VU23952 Produce an engineering design for drainage pipes and culverts
  • VU23953 Produce an advanced engineering design for a reinforced concrete structure
  • VU23957 Produce an engineering design for a reinforced concrete structure
  • VU23959 Produce an engineering design for a steel structure
  • VU23964 Produce advanced engineering drawings for a reinforced concrete structure
  • VU23965 Produce advanced engineering drawings for a steel structure
Elective units
    National ID
    Unit title
  • CPPBDN6106 Produce building information modelling for building design projects
  • DCSBIM639 Use building information modelling (BIM) technology for a project
  • DCSBSD611 Produce basic steel drawings
  • DCSENV636 Use basic environmental concepts in engineering
  • DCSFLE624 Use fluids in engineering
  • DCSSUR614 Use surveying in engineering
  • MEM23004 Apply technical mathematics
  • MEM30012 Apply mathematical techniques in a manufacturing engineering or related environment
  • VU23954 Produce an engineering design for a sewerage reticulation scheme
  • VU23963 Produce an engineering design for a stormwater reticulation scheme

Assessment methods

The methods of assessment used in this course include evidence gathering methods which have been selected in consultation with industry. This includes knowledge questions, case study scenarios, projects, presentations, observations, reports and portfolios. Methods of assessment are based on the job role and evidence is collected via a simulated work environment or workplace created on-campus. Skills are assessed holistically during the practical demonstration of tasks and this evidence is gathered using observation checklists which are completed by the trainer/assessor. 

These assessment strategies and evidence gathering are in accordance with the relevant training package or accreditation guidelines. Detailed Information is available in the assessment matrix, learning plans and assessment tools for each of the units of competency. Assessors use this matrix to ensure assessments, are undertaken across the duration of the course, rather than clustered together at particular times.

Learning resources, facilities and equipment

The following learning resources, facilities and equipment are available at each campus so that you can achieve the skill and knowledge requirements of this course.

Learning resources may include access to Blackboard, PowerPoint presentations, learning guides, handouts, NMT Library catalogue and opportunities to engage with industry professionals. Facilities and equipment may include access to relevant software (CAD, MS Office Suite), computers, printers, workplace manuals/procedures, workshops, and a simulated work environment and facilities including surveying equipment, soil testing labs, fluid labs, strength of material labs, drafting office simulations, and a workshop with hand tools, power tools and access to technicians.

Key dates

Semester and holiday dates are included in your Letter of Offer. View upcoming semester start and end dates.

There may be further semester intakes available for enrolment. You can view any further intakes when you submit your online application(opens in a new tab).

For information about pathways from TAFE to university, view our Pathways to university page.

How to apply

Apply to study at TAFE in six steps:

  1. find a course;
  2. check entry requirements;
  3. submit an application;
  4. accept your offer and pay;
  5. apply for your student visa; and
  6. receive your visa and come to Australia for your studies.

View our TAFE application process page for detailed advice

Apply now(opens in a new tab)

Philippines student John at East Perth TAFE campus
John
Philippines
East Perth

The best thing about my course is the hands on training and also the modern facilities and equipment. I really felt I received a high quality engineering education from TAFE. I gained new practical skills and not only theory-based learning. TAFE provides a globally accredited education that assists students to harness their skills and potential to be job ready in the future. 

Custom course guide

TIWA Course Guide

A guide to studying at TAFE in Western Australia, including study options, facilities and campus locations!

View Course Guide(opens in a new tab)

Download study area guide(opens in a new tab)

Apply now(opens in a new tab)

Contact us(opens in a new tab)

TAFE International Western Australia (TIWA) is the Registered Training Organisation (RTO) and Commonwealth Register of Institutions and Courses for Overseas Students (CRICOS) provider, for the delivery of training to international students, enrolled in a TAFE course in Western Australia. This nationally recognised course is delivered by a Western Australian TAFE college on TIWA's behalf. TIWA retains responsibility for the quality of the training and assessment delivered by the TAFE colleges and for the issue of certification documentation to students.

Share this page
Last updated on August 31, 2026